![deftdawg](/img/default-banner.jpg)
- Видео 17
- Просмотров 744 232
deftdawg
Добавлен 27 июн 2010
Smart hacks for smarter homes
Razer Blade Stealth 13": Battery Replacement
In this video, we go through how to replace / repair a Razer Blade Stealth 13" Laptop (RZ09-0239x) using a RC30-0196 battery replacement part.
Tools required:
1. Torx T5 driver (case)
2. Phillips #00 driver (battery)
3. Phillips #000 driver (connector cover)
Tools required:
1. Torx T5 driver (case)
2. Phillips #00 driver (battery)
3. Phillips #000 driver (connector cover)
Просмотров: 1 667
Видео
Car Speaker Repair on a Tesla Model S/X
Просмотров 2,1 тыс.3 года назад
In this video we'll cover diagnosing and repairing a car speaker for a Tesla Model S using a soldering iron, multimeter, and a 9v battery. 0:00 Intro 0:25 Test for faulty speakers in a Tesla 1:54 Disassemble the Door panel 5:35 Confirm speaker fault by checking for resistance 7:45 Inspect and diagnose fault on the bench 11:34 Repair the speaker 22:41 Reinstall speaker 23:07 Verify repair in car...
Remastered: How to use a BIOS flasher w/ Test clip to flash BIOS and EEPROM chips in Linux/Windows
Просмотров 91 тыс.4 года назад
(Remastered audio; special thanks to youtuber Mass Killer; Original video with comments @ ruclips.net/video/2Y06x1f22B0/видео.html) This video walks through assembly of a CH341a SPI BIOS 25xx/24xx series USB programmer with a SOIC8 SOP8 Test clip for solderless reading and writing to flashable IC chips. This technique is useful when you have a device with a BIOS that you need to modify, but the...
Run 32-bit Windows apps on Wine on 64-bit only Mac OSX Catalina 10.15+ (Guild Wars)
Просмотров 67 тыс.4 года назад
In this video we cover how to run Guild Wars, a 32-bit Windows application, on Wine for Mac OSX 10.15 Catalina which only supports 64-bit executables. Wineskin Winery patched for 64-bit OSX (Catalina / 10.15 ): github.com/Gcenx/WineskinServer/releases GuildWars Client: www.guildwars.com/en/download GuildWars Icons: www.iconarchive.com/show/mega-games-pack-23-icons-by-3xhumed/Guildwars-1-icon.html
Tesla Model S AutoPilot Retrofit? Don't Update the Firmware!
Просмотров 2,8 тыс.5 лет назад
PSA: If you've got a pre-autopilot Tesla Model S and you'd like to retrofit Autopilot to your car using OpenPilot, don't apply the 2019 Model S Firmware... In this video I'll talk about OpenPilot on a Tesla and give a short demonstration at the end. Come see us on Comma.ai's Discord in #Tesla (opc.ai/discord) See the breakdown of Hardware, Cost and Limitations on the Comma.ai wiki (community.co...
Ryobi P225 Brushless Drywall Screw Gun
Просмотров 10 тыс.5 лет назад
Unboxing and hands-on with the Ryobi P225 Drywall Screw Gun. Available at Home Depot stores in the US.
Apple has a free swollen battery replacement program for Early 2015 13" MacBook Pros too!
Просмотров 6 тыс.6 лет назад
On April 21st, 2018 Apple announced that they would replace swollen batteries on 13" non-Touchbar Late 2016 model MacBook Pros. My Early 2015 13" model is pretty heavily bowed (keyboard peaks between cmd and spacebar and the bottom of the case is bent) despite enjoying relatively pedestrian use. I decided to contact AppleCare to see if it was also covered and was advised that while mine isn't s...
MySmartBlinds Unboxing & Review
Просмотров 6316 лет назад
The MySmartBlinds blinds conversion kit takes your existing 2" to 2 1/2" venetian blinds and makes them autonomous rather than smart. Typically you set them up to open in the morning and close at night. An upcoming Alexa hub (not yet released) may eventually all for easier 'smart' control for being able to close the blinds to watch TV during the day or open them at night, but as of right now us...
How to use a BIOS flasher w/ Test clip to flash BIOS and EEPROM chips in Linux & Windows
Просмотров 319 тыс.6 лет назад
Fixed audio version of this video can be found @ ruclips.net/video/OttN8wQ1HhE/видео.html (thanks to RUclipsr Mass Killer for fixing it up) This video walks through assembly of a CH341a SPI BIOS 25xx/24xx series USB programmer with a SOIC8 SOP8 Test clip for solderless reading and writing to flashable IC chips. This techinque is useful when you have a device with a BIOS that you need to modify,...
Unboxing the OnePlus 5T Lava Red Edition
Просмотров 1466 лет назад
Unboxing and set-up of the OnePlus 5T Red edition - now available outside China.
$2 DIY Amazon Echo Dot Wall or Ceiling Mount!
Просмотров 31 тыс.6 лет назад
A trip to the home center, $2 and 5 minutes... DIY Amazon Echo Dot Wall or Ceiling Mount!
CDP-235 key travel sounds
Просмотров 18 тыс.6 лет назад
Not really noticeable at listening distance, but there is some sound from the keys coming back up. I suspect all pianos would make at least some sound as the keys return.
Casio CDP-235 Digital Piano Unboxing
Просмотров 31 тыс.6 лет назад
Unboxing and setup of the new Casio CDP-235 Digital Piano (replaces CDP-230) PDFs CDR-235 Manual: support.casio.com/storage/en/manual/pdf/EN/008/Web_CDP235-ES-1A_EN.pdf CDR-235 Appendix Sheet (sound modes/instruments/backing tracks): support.casio.com/storage/en/manual/pdf/EN/008/Web_07M1APPEND-WL-1A_EN.pdf
Unboxing the Ryobi 18V Brushless Impact Driver (R18IDBL-0)
Просмотров 44 тыс.6 лет назад
The R18IDBL-0 is cordless brushless 18V impact driver from Ryobi. It's currently not available in North America ( 🇺🇸 / 🇨🇦 ), but can be purchased and imported from Amazon UK for around $200 CAD / $160 USD shipped at the time of this video. Amazon UK Link: amzn.to/2wpdQ3X (111 GBP, but will have 15% VAT removed during checkout for North American orders) More Info Ryobi's promotional video about ...
Lockitron Bolt w/ Bridge Unboxing
Просмотров 2,1 тыс.7 лет назад
A quick unboxing of the Lockitron Bolt w/ Bridge. The Lockitron Bolt is the 3rd generation of smart door lock from Lockitron, it is bluetooth enabled and can communicate directly with your phone when near by or over the Internet via the companion Bluetooth to Wifi Lockitron Bridge.
Modify Blum IKEA dampers to fit in oval holes
Просмотров 8 тыс.9 лет назад
Modify Blum IKEA dampers to fit in oval holes
Diagnose & Repair a Bad Latch on a Frigidaire Dishwasher (GLD2250RDC4)
Просмотров 109 тыс.9 лет назад
Diagnose & Repair a Bad Latch on a Frigidaire Dishwasher (GLD2250RDC4)
mine is CH341B* its B! what now?
You answered my question that was not directly related to replacement of the latch, namely, does the latch normally make a popping sound when opening or closing. It most certainly does, as your video shows. I was concerned, as other brand dishwashers I've had, notably Maytag or Bosch, barely evidence any click or pop whatsoever when the door is opened or closed. I was very concerned that there was something wrong with our new Frigidaire. But no. Thanks!
Happy to be of help 😄
Super idea sir .. I've echo dot 3rd gen - will 3 inch end cap work ? Also , please suggest similar ideas for echo show 5 2nd gen
Can I flash bios with Arduino or raspberry pi pico ? Please help
in the first minute of your video we see your CH341A device with a jumper across the top left two pins - for some reason I need to shift mine a pin to the right to see it on my comm port?
thumbs up.thanks
Thanks so much. I'm trying to do this with a SPI-programmer+SOIC8 apparently & need to know how to do it for a Lenovo Ideapad 110-15ACL.
its annoying having shaking hands for a technician, sure lost money
wut? 😅
Clean and clear information so far
Thank you
The clip keeps slipping off
still sounds worse than the right rear one. that would bug me and change it
Wire's a wire, in my case the speaker was fine apart from the break, if yours was blown out, then yeah you'll want to replace it.
@@deftdawg yes but after you fixed, it didn't sound as good as the other one when you did the test. that would bother me ... the sound difference.
Fixed two of my speakers this way. Many thanks!
Glad it was of help 😄
dude i kinda feel ashamed for still falling for this stuff but i fell for the fake gpu, and this video helped me! thanks a lot
where's the info on how to fix the built in 3.3v fail that all of the older versions of this reader have? get te new model ch341a v1.6 ; how can any review about thiis be complete without that info?
You are a savior no other stupid tutorial actually made gw1 work besides this one
Amazing idea!! Thank you.
Struggling to get this to work but I could be doing something wrong. I've download WineSkin Winery but when I open it and click the + icon, none of the wineskin engines appear. Any ideas? Running a 2015 Macbook Pro with Monterey 12.7
Absolute hero
Thank you so much for this. You explained everything perfectly. I wish all tutorials were this good.
Awesome video. Just used it to fix my old razer blade stealth. Thank you so much!!!
Thank you so much for your work, your video help me to save a ton of time and money to avoid buying a new control board or new dishwasher
Thank you for the video, I'm really happy it works! Just one small issue: when I switch back to my Mac screen and then return to the game screen (wine), my mouse gets stuck in the upper left corner, and I can't see it anymore. Does anyone have a solution?
Hi there, what is the difference between 24x and 25x on CH341A programmer? thnx
Thank you, I just bought the programmer to try writing a correct bios to a fake 1060 6GB gpu I bought off ebay and I was wondering how that would work. Hope I find a bios that makes the card being properly detected afterwards.
Forgive my ignorance. Is there any solution for 32-bit Mac apps under Catalina+? When apps are totally incompatible they simply report that they won't install. But I have a handful of plugins, printer software and App Store downloads that install "successfully" but won't launch (line through the app). I'm thinking it should take that much to get them "patched" in some way. Is anybody aware of (or working on) a solution?
hi, i run into an issue when clipping to my bios chip. windows and programmer software stops detecting the usb programmer then ststes usb device malfunctioned. like if it shorted the usb. ive checked pin 1 connections and adapter to usb programmer and they should be correct as every video ive learned from. any ideas. firvers a installed usb recognized. but once i connect to thr chip it shuts off the usb. (no pwoer on board no cmos batt)
hi, i run into an issue when clipping to my bios chip. windows and programmer software stops detecting the usb programmer then ststes usb device malfunctioned. like if it shorted the usb. ive checked pin 1 connections and adapter to usb programmer and they should be correct as every video ive learned from. any ideas. firvers a installed usb recognized. but once i connect to thr chip it shuts off the usb. (no pwoer on board no cmos batt)
What happens if there's no logo or other identifying information on the IC chip except for numbers?
First you can try the autodetect function in the program. The CH341A will only deliver 3.3V to the chip. If you need 1.8V you need an adapter. 5V will require a modification of the CH341A. Other than that all SPI chips should be compatible. It is an interface, and they all use the same pins.
You should make a video of you doing this with a raspberry pi if you have one. The CH341A isn't even needed if you have a Pi and the test clip. Just have to find a way to connect the test clip to the Pi's GPIO port/header or get just a clip with some female to female jumper cables/wires to connect from the clip the Pi.
First one and now all 4 of my 2013 modelS speakers fail. I was looking for a solution but could not believe something like a wire connector would have come loose as was suggested by some. Your video gives me hope I can resurrect my speakers :)
Did exactly this and it crashes after I login, any know issue?
i need to know how to download flashrom on windows. their site is no help to me and asprogrammer constantly shows new chips
Thanks for posting! Hesitated to order dampers since I was uncertain if they would fit hinges with rounder holes but this convinced me it would work with some minor modifications! Just moved in to a new house with kitchen cabinet doors without dampers, I'm driving my self mad slamming the doors shut, constantly forgetting that these doors have no dampers! ;)
I'll post a update as soon as they arrive!
How to download a bios file for hp elitebook 8470p
Is there not a damper I can buy wherein I wouldn’t have to modify it?
You'll have to ask Ikea...
Thanks for a useful video. 👌👌 I have a question. I have this tool and I used to flash successfully my dell 3521 motjerbiaed bios chip. I also used this tool as serial to flash my tplink router through windows. My seagate harddosk recently crashed and ut seems like a bios problem. So can I use it to flash the bios chip on Seagate hard disk bios chip or shall I use it as a serial port and connect it to hard disk serial pins? Will it work? I have a seperate bios file for my hard disk as well. I am also confused about the commands to be used as I am gonna use windows utility to flash. 🙏🙏🙏
Thank you so much. This is very helpful!
You're lucky if it works without removing the chip. Often one finds that the other circuitry around the chip make it impossible to provide enough power to the chip and/or enough signal to program it.
Thanks! With the help of this video and a Kali virtual box I was able to flash my drives.
Really helpful! Don't know how long this would have taken me without the video. But really good informative video with all the info i needed for what I wanted to do =)
Would this be possible with my 2013 tesla, MCU 1 non autopilot?
Excellent video. Appreciate your taking the time to and effort to share this.
I had a cdp-235R for about a week, traded that, got a wk-200 and never looked back
Wow! Does this mean I can find a 2012+ year modelS, which has not been updated, and install comma3? Please correct me on the years, and what I can do!! I’m excited! Always wanted this
Depends, the hud integration can be done with non-rooted MCUv1 cars, but many will have updated to MCU2, can still do openpilot with those but no AP HUD. Check out tinkla.us
Thank you so much for this! The same thing happened on 3 of my 4 door speakers, and on two of the wires for one of them (2013 model S). I never would have thought to check if I hadn't seen your video. There must be some material incompatibility with the epoxy, or the epoxy wasn't fully cured or something. On close inspection, it looks like the wires are made of a thin sheath of copper over some other material; when I broke open the black epoxy, a rust-colored powder came out and I could see the copper sheath was missing.
Mpeg2 Rom file dawnload
I NEED THIS REALLY BAD
does anyone else get an error saying wineskin is damaged on MacOS Monterey?
I’m in the exact same boat as you, same error, same MacOS Monterey I know this comment was 7 months ago, but did you find a solution?
In the same boat here@@razzo2401